For a magnetic track light recessed installation, confirm the chosen track profile and installation drawing before cutting or closing the ceiling. At IMIGY Lighting, our Combo Track Lights provide magnetic modules with a 48V DC input. Our Flame Track Lights provide a conventional track alternative. Choose the system first: the dimensions of a lighting module do not establish the ceiling opening required by its rail.
A recessed track decision should be made before ceiling work turns the route into a fixed construction detail. The lighting module is only one component of that decision. Our Combo magnetic range supplies documented module options, while Flame is a conventional track choice. Establish which system is intended, then obtain the matching rail detail so the ceiling preparation follows the selected components rather than a generic picture of recessed lighting.
Ceiling preparation should follow the actual rail, support arrangement and power-supply location. Confirm access for connections and maintenance before finishing. A linear track light module and its supporting track are separate components, and their dimensions serve different purposes.
Coordinate the rail route with ceiling framing and other services. Obtain the selected profile’s opening, depth and fixing requirements rather than estimating them from photographs. For a magnet light track, verify the matching supply and connectors. An office track light route should also reflect desk positions; a neat ceiling drawing alone does not establish a suitable lighting layout.
Coordinate the route with the ceiling section as well as the plan. Show changes of direction, proposed feed positions and nearby structural or service elements. An apparently clear line in plan may still cross an obstruction in the void, so both views matter to the preparation discussion.
Identify the exact rail profile before recording an opening dimension. Different module and rail dimensions describe different parts of the system. The Combo module width in the product table cannot be used to establish how much ceiling material should be removed.
Keep the proposed connection and access arrangement visible before the ceiling is closed. Confirm it with the selected component documentation rather than assuming all equipment can be placed in an inaccessible void. These are coordination requirements, not additional installation capabilities established by the luminaire table.
Review the installation sequence with the ceiling detail in hand. Identify which decisions must be fixed before finishes are completed and which remain adjustable within the selected system. Do not assume that the module’s later repositioning capability removes the need to establish the rail route and construction correctly at the outset.
If an existing ceiling is being modified, record the original condition and any route constraint separately from the preferred new appearance. The proposal should state where the rail can be accommodated and where another arrangement needs consideration. This gives the lighting discussion a real construction basis rather than an idealised line on a blank plan.
Retain the final profile identification with the issued ceiling drawing. If another component is proposed later, compare it with that record before accepting an equivalent description. The profile, connection and mounting details should still describe the same system after the change. That continuity helps prevent an apparently small product substitution from creating a mismatch in a ceiling opening that has already been prepared.
Our Combo series combines magnetic attachment with a mechanical hook and offers several module types. The floodlight below is a compact linear option. Its body dimensions help plan module placement, but they are not a rail cutout specification. Confirm the recessed rail details separately.
The selected Combo floodlight provides a compact module whose physical dimensions help define where it can sit along the matched rail. The range’s magnetic and mechanical retention description concerns the module arrangement. It does not supply a complete recessed rail construction detail or establish a universal ceiling depth for the whole system
Where the project calls for a conventional track, our Flame series offers compact directional fittings. Confirm the actual track mounting arrangement and adapter before proceeding; this product table does not establish a recessed magnetic installation option.
Flame should be considered when the project uses a conventional track arrangement. Its body dimensions and listed supply help distinguish that option from the Combo magnetic module. Confirm the chosen adapter and track mounting detail instead of transferring the ceiling preparation requirements from one system to the other because their ceiling routes look similar.
Plan the LED track lighting system as a coordinated set of rails, fittings and supply components. Share your ceiling section and mounting intention with us to discuss Combo magnetic modules or Flame conventional fittings. Confirm profile drawings, component access and final positions before finishing, so later lighting adjustments are not constrained by an unsuitable ceiling opening.
Before authorising the ceiling opening, bring together the selected rail drawing, proposed route and mounting arrangement. Mark any detail that remains unresolved. If the system selection changes, review the opening and fixing proposal before work continues rather than assuming the previous detail remains suitable.
At IMIGY Lighting, we recommend discussing the lighting module and the ceiling preparation as related but distinct decisions. Share the ceiling section and intended appearance alongside your module selection. This makes it possible to assess the Combo or Flame route with the information needed for the actual installation, while avoiding dimensions inferred from photographs or a module’s front width.
Keep the confirmed profile with the construction drawing. If the route or system changes before ceiling completion, review the preparation detail again so the opening, fixing and intended access still refer to the same selected arrangement throughout construction.
Q: Can I use the width of a Combo lighting module as the ceiling cutout width?
A: No. The module sits in a separate rail profile. Use the installation drawing for the selected rail to establish the opening and mounting depth.
Q: Does a recessed magnetic rail mean every part of the lighting system is hidden?
A: Not necessarily. Module projection and supply placement depend on the selected components. Review the ceiling section and access arrangement before approving the finished appearance.
Q: Can Flame fittings replace Combo modules if both products appear to fit the same ceiling line?
A: Appearance is insufficient. Flame and Combo have different supply and mounting arrangements. Confirm the rail, adapter and electrical configuration before selecting an alternative.
Q: Can I prepare a standard slot now and choose the rail profile later?
A: That risks committing the ceiling to a dimension that has not been matched to the selected rail. Confirm the profile and applicable installation drawing first, including the fixing and access arrangement, before deciding on the opening.
It is recommended that you upgrade the latest browser
Chrome
Firefox
Edge
