The Square emergency light is ideally suited for commercial corridors, open-plan offices, retail stores, hotel lobbies, and industrial facilities where clear exit path marking and wide-angle illumination are required. IMIGY Lighting's voyager Emergency Blade Exit Sign delivers a 30-meter viewing distance with IP20-rated PC housing, while the Guard Fit Emergency Downlight provides IP65 wet-location protection with interchangeable round and oval lenses. Both products are certified to IEC 60598, EN 60529, and LM80/TM21 standards, ensuring reliable performance in any environment.
Emergency lighting placement is governed by building codes and safety standards. A Square emergency light excels in linear spaces such as corridors and stairwells, while a Round emergency light suits open areas like lobbies and meeting rooms. The voyager Blade Exit Sign supports six mounting methods — ceiling, recessed, suspension, track, wall, and flag — without requiring the word "seamless" for installation. The Guard Fit Downlight, with its IP65 rating, brings Emergency light fixture protection to bathrooms, kitchens, and outdoor covered areas.
A Square emergency light is most effective in environments where directional guidance and geometric alignment matter. In long corridors, the square form factor provides consistent visual spacing and clear egress path marking. For exit doorways, the square shape delivers a wider viewing angle compared to circular alternatives. The voyager Blade Exit Sign, with its 30-meter viewing distance, is particularly effective in hotel hallways, office corridors, and retail aisles where occupants need to locate exits quickly during a power failure.
The voyager Blade Exit Sign (EX02-AM3S-30U3) is a certified LED emergency light designed for versatile installation. Its PC housing with PET legend ensures durability in high-traffic environments. The LiFePO4 3.2V 1800mAh battery delivers ≥3 hours of emergency discharge, exceeding standard requirements. With support for Self-Test, DALI-2, and manual test modes, it is ideal for buildings that require automated compliance reporting.
The Guard Fit (ED1090-AM3SA-N) is an IP65-rated Emergency light fixture that excels in wet and dusty environments. Its interchangeable round and oval lenses allow the same fixture to serve both open areas and linear corridors. The round lens distributes light evenly across open-plan offices and lobbies, while the oval lens focuses illumination along narrow hallways. Installation is surface-mounted or recessed — never described as "seamless."
Selecting the correct Emergency lighting requires matching the fixture form factor to the installation environment. Use a Square emergency light like the voyager Blade Exit Sign for:
· Hotel and office corridors requiring clear directional guidance
· Retail stores where exit signs must be visible from multiple angles
· Industrial facilities with high ceilings and long sight lines
Use a Round emergency light like the Guard Fit Downlight for:
· Open-plan offices requiring wide-area illumination during power failure
· Bathrooms, kitchens, and wet areas needing IP65 protection
· Outdoor covered walkways and entrance canopies
When planning an LED emergency light installation, verify the following:
· Viewing distance: At least 30 meters for exit signs in commercial spaces
· IP rating: IP20 for indoor dry areas, IP65 for wet or dusty locations
· Battery type: LiFePO4 recommended for longer cycle life
· Test mode: Self-Test or DALI-2 for automated compliance
· Mounting options: Confirm compatibility with ceiling, wall, or recessed installation
· Certifications: RoHS, CE, CB
Q: Can a square emergency light be installed in outdoor areas?
A: The voyager Blade Exit Sign (IP20) is intended for indoor use. For outdoor covered areas, the Guard Fit Downlight (IP65) is the recommended choice.
Q: What is the advantage of the Guard Fit's interchangeable lenses?
A: The round lens provides wide-angle distribution for open areas, while the oval lens focuses light along corridors, allowing one fixture model to serve multiple layouts.
Q: How does the voyager Blade Exit Sign support different mounting methods?
A: It supports ceiling, recessed, suspension, track, wall, and flag mounting, offering flexibility for renovation and new construction projects alike.
Q: What test mode is best for a large commercial building?
A: DALI-2 mode is recommended for large buildings, as it enables centralized control and automated monitoring through a building management system.
Q: Is the Guard Fit suitable for emergency lighting in parking garages?
A: Yes, with its IP65 rating and robust PC housing, the Guard Fit is suitable for covered parking areas and other semi-outdoor environments.
It is recommended that you upgrade the latest browser
Chrome
Firefox
Edge
